Product ID:  C23
Date Of Manufacture:   1997





Product Details:

Location India
Green camera
Left to Right PCB Flow
Under Stencil Wipe with Vacuum
Touch Screen Monitor ,120 volt...3 Phase...60HZ


Model Specifications:

General
Length (inches) 56.1
Width (inches) 51.7
Height (inches) 58.4
Automation Fully automatic

Board Handling
Maximum size (inches) 20x20
Minimum size (inches) 1.75x1.75
Maximum thickness (") 0.02 to 0.25
Minimum thickness (") N/A
Maximum warpage (") 0.3
Underside component clearance (inches) 0.12 to 1.57
Board held by Edge clamp
Board support Magnetic pins, tooling pins, vacuum plate
Conveyor Standard
Board Movement R to L, L to R
Dual-lane board handling? No

Print Head
Print area (inches) 20 x 19.5
Maximum print stroke(") 2.2 to 22.3
Mdthod of registration Vision
Optical alignment? Yes
Alignment accuracy (microns) ±25
Alignment repeatability (microns) 25
Print Modes Print/print, print/flood, flood/print, on contact, 1 or 2 deposits
Print speed (inches/second) 0.08 to 5.9
Print pressure (pounds) 0 to 44
Snap off (print gap) (inches) 0 to 0.24
Is snap-off programmable? Yes
Cycle time (seconds) Single lane: 12.5

Stencil
Frame size (inches) 29x29
PCB stencil seperation speed (inches/second) 0.04 to 0.79
Stencil cleaning Dry, wet, vacuum
Programmable? Yes
Stencil Wiper Optional

Squeegee
Squeegees Metal, polyurethane, other
Squeegee pressure (pounds) 0 to 44
Where measured? Load cell in print
Horizontal or central pivot? Horizontal

Vision system Type
On the move, look up and look down
Field of vision (inches) 0.24x0.32
SMEMA fiducial standard compatible? Yes
Align calibration Full automatic
Post-print inspection available? 2-D

Program
Up and down line protocol SMEMA, SECS, GEM
Number of programs stored 1000+