Product ID:  C67
Date Of Manufacture:   2002





Product Details:

Fuji GP551-E Screen Printer
Model GP551-E
Year: 2002
Air Cooling
Stencil Wipe
Vacuum Tooling
Good Condition


Model Specifications:

General
Length (inches) 70.3
Width (inches) 68.9
Height (inches) 61
Automation Fully automatic

Board Handling
Maximum size (inches) 20x18
Minimum size (inches) 3.15x1.97
Maximum thickness (") 0.157
Minimum thickness (") 0.031
Maximum warpage (") 0.04
Underside component clearance (inches) 0.35 to 1
Board held by Edge clamp, vacuum
Board support Tooling pins, vacuum plate, other
Conveyor Standard
Board Movement R to L
Dual-lane board handling? No

Print Head
Print area (inches) 20 x 18
Maximum print stroke(") 27.5
Mdthod of registration Vision
Optical alignment? Yes
Alignment accuracy (microns) ±25
Alignment repeatability (microns) ±25
Print Modes Print/print, on contact, 1 or 2 deposits
Print speed (inches/second) 0.039 to 11.81
Print pressure (pounds) 2.2 to 4.4
Snap off (print gap) (inches) 0
Is snap-off programmable? Yes
Cycle time (seconds) Single lane: 10

Stencil
Frame size (inches) 35.8x27.16
PCB stencil seperation speed (inches/second) 0.004 to 3.15
Stencil cleaning Dry, wet, other
Programmable? N/A
Stencil Wiper Standard

Squeegee
Squeegees Metal, polyurethane
Squeegee pressure (pounds) 2.2 to 44.1
Where measured? On print head
Horizontal or central pivot? Central

Vision system system Type
On the move, look up, look down
Field of vision (inches) 0.35x0.35
SMEMA fiducial standard compatible? No
Align calibration Full automatic
Post-print inspection available? No

Program
Up and down line protocol SMEMA, SECS, GEM
Number of programs stored 10