Product ID:  C746
Date Of Manufacture:   2007





Product Details:

HELLER 1809 EXL 

- LEFT TO RIGHT
- EDGE AND MESH
- RUN HOURS: Only ~4000Hrs of use

Input (3 Phase) Standard 480 volts 
Breaker Size 100 amps @ 480v
kW 11-13 Continuous
Typical Run Current 25-30 amps @ 480v
Frequency 50/60 Hz 50/60 Hz
Sequential Zone Turn On

Dimensions:
Overall Length 183" (465 cm) 
Overall Width 54" (137 cm) 
Overall Height 63" (160 cm) 
Typical Net Weight 3500 lbs. (1588 kg) 
Typical Shipping Weight (Domestic) 4000 lbs. (1814 kg) 
Typical Shipping Weight (Export) 4500 lbs. (2041 kg) 

Computer Control:
AMD or Intel Based Computer 
Recipe Storage > 500 
Flat Screen Monitor 
Windows Operating System Windows XP 
Monitor mount 
Auto Start Software 
Data Logging 
Password Protection 
KIC / ECD Profiling Software 
Signal Light Tower 
Powered Hood Lift 
Five (5) Thermocouple Profiling 

Mesh Belt Conveyor:
Height From Floor 35.5" + 2.0" (90 cm + 5 cm) 
Maximum PCB Width 
22" (55.8 cm)
Space Required Between PCB's 0.0" (0.0 cm
Conveyor Length On-Load 18" (46 cm) 
Conveyor Length Off-Load 18" (46 cm) 
Heated Tunnel Length 105" (254 cm) 
Process Clearance Above Mesh Belt 2.3" (5.8 cm) 
Mesh Belt Pitch 0.5" (1.27 cm) 
Maximum Conveyor Speed :74"/Min (188 cm/min.) 
Conveyor Direction Left to Right 
 Conveyor Speed Control Type:  Closed Loop

Edge Hold Conveyor System Option:

Height from Floor ' Standard 37.0" + 2.0" (94 cm + 5 cm)
Clearance Above Conveyor Pins 1.15" (2.9 cm) 
Clearance Below Conveyor Pins 1.15" (2.9 cm) 
Length of PCB Support Pins .187" (4.75 mm) .
Minimum/Maximum Board Width
2.0" ' 20" (5 ' 50.8 cm)
Edge Hold Rail Heaters :Not Required 
Power Width Adjustment 
Auto Lubrication System 

Forced Convection Zones:
Top 9 
Bottom 9 
Heater Type Instant response open coil 
Heater Material Nichrome 

Temperature Control:
Accuracy of Temperature Controller + .1C 
Cross-Belt Temperature Tolerance + 3.0C 
Heater Wattage Per Zone 6000 w 
Temperature Range Standard 25-350C 
  Insulation Type Calcium Silicate Calcium Silicate
 
Cooling Systems:
Number of Cooling Zones Standard 2 




Model Specifications:

Other available equipment from Heller: