TK809 - Speedline Aquastorm 200 (Torrid Zone) In-line Aqueous Cleaning System (2004)

Speedline Electrovert Aqueous Cleaning System
Brand: SpeedlineModel: Aquastorm 200 (Torrid Zone)Serial #: 480409Year: 2004Type: In-line Cleaner
Prewash Module:
14" (36cm ) sectionVee Jets staggered nozzles, 2 upper and 2 lower spray manifoldsValve switching to divert pre-wash to drain or wash sump
Heated Recirculating Wash Module:
48" (122cm) sectionVee Jets staggered nozzles, 4 upper and 4 lower spray manifolds80 Gallon (303 liter) sump tank with slanted bottom for efficient drainingTwo (2) 16 kW (total 23 kW) immersion heaters Over temp safety circuits Automatic fill and drain brass solenoid valvesEasy access to catch screen, pump inlet filters, float switches, and heatersSlide out tank collection screen and pump inlet filtersPre-plumbed to accept Hurricane Jet upgrade
Chemical Isolation (DRAG-OUT) Module:
36" (91 cm) dwell zone
Heated Recirculating Rinse Module:
48" (122 cm) sectionVee Jets staggered nozzles, 4 upper and 4 lower spray manifolds50 Gallon (189 liter) sump tank with slanted bottom for efficient drainingTwo (2) 16 kW (total 23 kW) immersion heaters Over temp safety circuitsHeavy duty stainless steel tank lid with gasket seal Automatic fill and drain brass solenoid valvesEasy access to catch screen, pump inlet filters, float switches, and heatersSlide out tank collection screen and pump inlet filtersPre-plumbed to accept Hurricane Jet upgrade
Final Rinse Module:
17" (43cm) sectionVee Jets staggered nozzles, 2 upper and 2 lower spray manifoldsUpper and lower stainless steel manifold control valves
Torrid Zone:
90.7" (230.9 cm) Total dryer sectionTemperature monitors: 3 via thermocouple sensors, Provides LCD readout on operator control panelFinal dryer module incorporates exit end enclosure: exit end enclosure width (474.5mm or 18.68"), Sound dampening padding and storage compartmentBlower Drying Station #1: 15 HP Direct Drive Blower, 14.158 m3/min @101.6 cm H2O (500 scfm @ 40" H2O), Temp up to 127C (260F)Blower Drying Station 2A and 2B: 3 HP Direct drive blowers, 2 x 6kW heaters in each convection zone (total of 4), variable output from 14.158 m3/min to 56.63 m3/min @7.62 cm. H2O (500 to 2000 scfm @ 3" H2O), Separate blower fail detect pressure sensors in each zone, separate zone drying temp up to 140 C (300F)
Conveyor Module:
20" (51 cm) width stainless steel mesh beltConveyor tentioning with safety cluthClosed loop conveyor speed control via computer1/8 HP 90V DC motor
System Controls:
System functions computer controlledNoise suppression package < 80 dba at the exit end of the machineCustom operator keypad and multi-line LCD display with LED bar graphsTemp controls via internal PC and thermocouple sensorsLiquid level tank height sensors dispayed on control panelProgrammable process set point alarmsEmergency stop controlsMotor overload protection on pumps and blowersHigh/low water level protection alarmsAuto start 7 day programming timerOpen function keys for future expandabilityEmergency condition source identificationFront mounted stainless steel pressure gauges for all wet sectionsHigh temp shut-off switches in wash and dryer sections
Plumbing, frame and enclosures:
UL markedStainless Steel plumbing with "Kwik Clamps" for wash, rinse and fill linesSingle point utility connections1 x 10" exhaist stack2 x 10" exhaust stacksGravity cascadeTriple welded polypropylene liquid tanksCPVC drain plumbingOver spray protection on wet modulesPainted cold rolled steel, and stainless steel with tubular steel frameScratch inhibiting textured gray polypropylene constructionHinged tempered glass viewing windows and spash shieldsFront and rear removable covers
Power Specifications: 480V, 3 phase, 50/60hzMachine Dimensions~: 7333mm (287") x 1518mm (60") x 1302mm (51")