TK1191 - ASYMTEK DispenseMate D-585 Benchtop Fluid Dispensing System (2009)

Asymtek DispenseMate D-585 Benchtop Fluid Dispensing System (2009)Model: D-585Date Manufactured: 5/09Serial Number: 31314
Specifications:
Motion SystemType: Brushless DC servo motors with closed-loop encoder feedbackEncoder resolution: 10 micronsX-Y acceleration: 0.25 g peak with S-curve jerk controlX-Y velocity: 500 mm/s (20 in./s)Z-axis velocity: 500 mm/s (20 in./s)Placement accuracy: ±100 µm (0.004 in.), 3 sigmaX-Y repeatability: ±0.025 mm (0.001 in.)Z-axis repeatability: ±0.025 mm (0.001 in.)Z-travel: 75 mm (3.0 in.)X-Y max travel: 525 x 525 mm (20.7 x 20.7 in.)Tooling plate: 537 x 547 mm (21.1 x 21.5 in.)Service station: integrated vacuum purge/needle tactile sensorComputer: Laptop with Windows® Operating SystemUser environment: Fluidmove® for Windows®
Vision and Lighting:Vision: Vision system with Automatic Pattern RecognitionLighting: Programmable, on-axis, red/blue LED, 256 steps
Fluid Delivery Method:Valve: DV-01
Payload:Tool (z-axis): 3 kg (6.6 lbs)Total workpiece (y-axis): 3 kg (6.6 lbs)
Dispense Area (Includes camera and height sensor): With service station: 465 x 475 mm (18.3 x 18.7 in.)Without service station: 465 x 385 mm (18.3 x 15.2 in.)
Facilities Requirements:System footprint (without laptop PC): 760 x 1073 x 635 mm (w x d x h) (29.9 x 42.2 x 25.0 in.)Air supply: 85 liters/min, 620 kPA (3 CFM @ 90 psi) Note: may be higher depending upon applicationPower: 100-240 VAC, 5 amps, 50/60 Hz, single phaseWeight: 70 kg (154.3 lbs)
Standard Features:Dynamic Dispense Control (DDC)Integrated height sensorJet-on-the-Fly (JOF)Needle/nozzle heat control (integrated into vision system)Low air pressure alarm with adjustable set pointPrecision air regulators
Tool (z-axis): 3 kg (6.6 lbs)Total workpiece (y-axis): 3 kg (6.6 lbs)